There are many uses of servo motors, and we want to figure out where servo motors will be used. Then the principle of the motor to say a little about the function of the motor.

The rotor inside the servo motor is a permanent magnet. The U/V/W three-phase electricity controlled by the drive forms an electromagnetic field, and the rotor rotates under the action of this field, while the encoder that comes with the motor feeds back signals to the drive, which adjusts the angle

In previous articles, I have introduced servo motors, torque motors, and inverter motors. However, did you know that there are other types of motors according to their functions? To improve your knowledge of motors, this article will introduce micro-controlled motors and full-disk motors. If you are

What is the difference between a differential motor and a brushless motor? The rotor of a differential motor is a coil winding, connected to the power output shaft, and the stator is a permanent magnet; the rotor of a brushless motor is a permanent magnet, connected to the output shaft together with

A BLDC motor (brushless DC motor) is a rotating motor with permanent magnets in the rotor and windings as part of the stator. The BLDC motor replaces the mechanical commutator on a brushed DC motor with an electric commutator, powered by a DC power supply through an integrated inverter/switching pow

A stepper motor has a simple structure and can be speed-regulated over a wide range of frequencies, and its speed is not affected by the size of the load. As a specialist motor supplier, Leili will tell you several stepper motor control methods are described below.I.Tools / raw materialsstepper moto

Company's passion for the game takes center stage as AGS displays full lineup of new slot and table games, and online social and real-money games LAS VEGAS, March 26, 2019 /PRNewswire/ -- AGS (NYSE: AGS) (or the "Company") today announced that it will be exhibiting at NIGA's Indian Gaming Trade S...

Choosing the right stepper motor allows it to be installed properly and ensures that it meets the functional requirements so that it can be used properly. Choosing the right motor is therefore the first step towards its optimal application. And from the motor selection aspect, it is necessary for ev

1. Stepper motors are used in low-speed applications - no more than 1000 revolutions per minute, (6666 PPS at 0.9 degrees), preferably between 1000-3000 PPS (0.9 degrees). It can be made to work in this range by means of a reduction device when the motor is working efficiently and with low noise.2.

DC motor have a wide range of applications and are often used in harsh environments, such as humid, high temperature, dusty, corrosive, etc. Therefore, in addition to the proper use, the protection link of it is an indispensable part of the electrical control system, and proper protection can extend