News

The permanent magnet synchronous motor, referred to as PMSM, is actually an AC motor. Its stator runs with a three-phase difference alternating current, while its rotor is a permanent magnet. Do you know its advantages? Most of you may know that it can help save much electricity, and it’s true. But do you know other advantages? If not, Jiangsu Leili Motor Co., Ltd., a well-known micro-motor supplier with the ability of R&D and manufacture, will explain four major advantages of permanent magnet synchronous motor. 1. High efficiency High quality synchronous motor factory finds that the high efficiency does not only mean that the efficiency of permanent magnet synchronous motor at the rated power is higher than that of ordinary three-phase asynchronous frequency-controlled motor, but also refers to that the excitation field of permanent magnet synchronous motor is provided by permanent magnets in the whole speed range. And the rotor requires no excitation current, which increases the motor efficiency. It can save electricity at any speed point compared with an asynchronous frequency-controlled motor, especially at low speed. 2. Low starting current and high starting torque Due to the characteristics of the inverter, the asynchronous variable speed motor has low main magnetic field, low power factor, heavy starting current and small starting torque when starting at low frequency, while Jiangsu Leili permanent magnet synchronous variable speed motor that is made by a well-known China synchronous motor supplier, has constant main magnetic field, active stator current, low starting current and high starting torque. 3. Excellent energy consumption indicators The energy consumption indicators of the motor are the product of motor efficiency and power factor. When an asynchronous variable speed motor works under load, its efficiency, power factor, and energy consumption indicators decrease. However, the efficiency and power factor of Jiangsu Leili permanent magnet synchronous motor approximate a horizontal curve, and its energy consumption indicators are under full load even when the motor is only loaded, which further improves the electricity efficiency and power quality factor. 4. Small size and light weight High-performance permanent magnet materials are used to provide a magnetic field, which greatly enhances the air gap magnetic field and reduces the size and weight of a permanent magnet motor compared with an induction motor. Based on the above advantages, permanent magnet synchronous motor is the best choice for inverter drive motor because it’s more efficient and energy-saving than ordinary three-phase asynchronous inverter motor!

Control Modes of A Servo Motor A motion controller usually uses two types of commands to control servo motors: digital pulse and analogue signal. 1. Digital pulse In this method, which is similar to the control mode of the stepper motor, the motion controller sends “pulse/direction” or “CW/CCW” type pulse command signal to the servo motor driver, which works in the position control mode and completes the position closed loop. This control model is adopted by most Japanese and domestic servo motor products. Pros: easy to debug the servo motor system; not easy to produce interference. Cons: low servo system response. 2. Analog signal In this control mode, the motion control system sends +/-10V analog voltage commands to the servo driver, and receives position feedback signals from position detection elements such as motor encoders or linear encoders. Most of the servo products in Europe and America adopt this mode of operation. Pros: fast servo response. Cons: more sensitive to field interference; slightly complicated debugging. Since you have known the above two control modes of the servo motor, Leili Motor will next describe six steps to debug the servo motor by analog signal. 6 Debugging Steps 1. Parameter initialization Initialize the parameters before wiring. On the controller: Choose the control mode, reset the PID parameter, set off the enable signal when the controller is energized as default, store this condition and ensure that when the controller is energized the next time, this condition is as default. On the servo motor: Set the control mode, set to enable controlling from outside, gear ratio output by encoder signal, set the proportional relation between control signal and motor speed. Generally, it is suggested that the maximum design speed in servo operating should correspond to 9V control voltage. 2. Wire connection Shut down the controller and connect the signal wire between the controller and servo motor. The following wires must be connected: the analogue output wire of the controller, enabling signal wire, and encoder signal wire output by the servo motor. After the wire connection is rechecked and there is nothing wrong, energize the servo motor and the controller (including PC). And then the servo motor should have no motion and can rotate easily by external force. If not, check the setting of enabling signal and wire connection. External force should be used to rotate the servo motor to check if the controller can detect the motor position change. If not, check wire connection and setting of encoder signal. 3. Direction testing For one closed loop control system, if the direction of feedback signal is incorrect, the consequences must be disastrous. Turn on the enable signal of the servo motor attachments via the controller, and the servo motor should rotate at a lower speed, which is called “zero drift”, whose command or parameter will be displayed on the controller. The command or parameter can help you to confirm whether the speed and direction of the servo motor can be controlled by the command or parameter. 4. Zero drift inhabitation During the closed loop control, the existence of zero drift will have certain influence on the control effect and you’d better restrain it. Adjust carefully using the parameters of zero drift inhabitation on the controller or the servo motor to make the motor speed close to zero. 5. Closed-loop control building Turn on the servo enable signal again by the controller and input a smaller ratio gain on the controller. Turn on the enable signal of the controller and servo motor. 6. Closed loop parameter adjustment Adjust the control parameters finely to ensure that the servo motor moves in accordance with the command from the controller.

Fior Markets has released a new market study titled Global Servo and Stepper Motors Market which contains an introduction to new trends. This information will guide the businesses performing in the industry to know the market and make the strategies for their business growth accordingly. The research report outlines the comprehensive and collaborative analysis of the industry from past to present, and also gives a forecast. Then, it studies the market size, industry share, key drivers, major segments, and CAGR. The industry verticals, including competitive market scenario, development opportunities, and regional presence,e have also been covered. Well-established international vendors in the Servo and Stepper Motors market are giving tough competition to new players because they face difficulties with technological development, reliability, and quality problems. The report answers questions on the current market development, opportunity, the competitive scope, and cost structure. Key insights given by segments will help you monitor future profitability and make critical decisions for growth. Professional Key players including in the report :ABB Ltd, Applied Motion Products, Faulhaber, Nippon Pulse, Schneider Electric, Ametek, Inc., Emerson, Mini Motor, Moog, Nidec Corporation, Phytron, TECO Electro Devices, Azbil, General Electric, Allied Motion Technologies, Inc., Siemens AG, Rockwell Automation Inc., and others. DOWNLOAD FREE SAMPLE REPORT:https://www.fiormarkets.com/report/servo-and-stepper-motors-market-by-motor-type-385901.html#sample Servo and Stepper Motors market report offers a professional and detailed study of the latest trends and upcoming market advancement prospects, key drivers, and constraints, segmentation study, competitive analysis, and forecast analysis. Further, it researches the global market size (value, capacity, production, and consumption) in a key region including North America, Europe, Asia Pacific, South America, and the Middle East and Africa. Based on manufacturers, region, type, and application, this report analyzes the market status, opportunities and challenges, entry barriers, market share, and growth rate. This statistical study also demonstrates market scope, production, supply/demand, and import/export. Then it studies raw materials, downstream demand, and market dynamics. Overall evaluations featured in the report have been made using approved research methodologies and inference. The cost structure analysis covers the cost of raw materials involved in the Servo and Stepper Motors cost. BROWSE COMPLETE REPORT AND TABLE OF CONTENTS:https://www.fiormarkets.com/report/servo-and-stepper-motors-market-by-motor-type-385901.html The traders, distributors, dealers, and manufacturers involved in the market on a global scale is offered. In-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness according to segments is also provided in the report. The market study enhances the decision-making potential by clarifying significant aspects related to market stability. Customization of the Report: This report can be customized to meet the client’s requirements. Please connect with our sales team ([email protected]), who will ensure that you get a report that suits your needs. Linda Cristline has lived in Seattle her whole life. Linda has worked as a journalist for nearly a decade, having contributed to several large publications, including The Seattle Times and the Oakland Tribune. As a journalist for Canyon Tribune, Linda covers national and international developments.

What is the difference between a differential motor and a brushless motor? The rotor of a differential motor is a coil winding, connected to the power output shaft, and the stator is a permanent magnet; the rotor of a brushless motor is a permanent magnet, connected to the output shaft together with the housing, and the stator is a winding coil, without the commutation brushes used to change the electromagnetic field alternately in a differential motor, so it is called a brushless motor. It is called a brushless motor. Both differential motors and brushless motors are motors used to drive mechanical equipment, but their working principles and application scenarios are very different. A differential motor is a special type of motor that enables a vehicle to steer by making the two wheels move at different speeds when turning. A differential motor is generally composed of an electric motor, a re-speeder, an interpolator, a fork and other components. Differential motors are mechanically efficient and have high steering accuracy, but can only be used for specific applications, such as for maintaining smooth and controlled steering while the vehicle is moving. Brushless motors, on the other hand, are a common type of motor, also known as brushless DC motors (BLDC), which work by converting electrical energy into magnetic energy and mechanical motion to achieve work. It has the advantages of higher efficiency, lower noise and longer life than traditional DC motors, and is widely used in industry, household appliances, automobiles, aviation and other fields. Therefore, differential motors and brushless motors are very different in terms of working principle, usage scenarios and application areas. Differential And Brushless Motor, Which Is Better Motors have an important role in many scenarios, especially in industrial applications, which is better: differential motors or motors? It is the most commonly used type of motor. So, differential motor and brushless First, from the motor structure, differential motor and ordinary motor structure is basically the same, only an additional reducer mounted on the motor shaft, while the brushless motor structure is more complex, consisting of three parts: brushless motor winding, position sensor and intelligent circuit controller, which makes its mechanical structure more complex. Secondly, in terms of power output, brushless motors are mainly known for low noise, low heat emission, low loss and high performance, compared with traditional motors, the performance advantages of brushless motors are more obvious, while differential motors are limited by the reducer, and the power output will be reduced accordingly. Furthermore, in terms of noise, temperature and heat generation, brushless motors have lower noise and lower heat generation, and the temperature control of brushless motors is more accurate, compared to differential motors, which will have higher heat generation and higher noise. In addition, from the viewpoint of power transmission, brushless motor can achieve precise torque control, no maintenance, and more stable operation; while differential motor needs regular maintenance, and power transmission cannot meet the requirements of high precision. Considering from the control system, brushless motor can realize precise position control and can realize higher precision motion control; while differential motor has a more complex control system and more complicated motion control due to the limitation of the reducer. Finally, from the price consideration, brushless motor is more expensive, but its price is not much higher than the price of ordinary motor; while the price of differential motor is lower, but its maintenance cost is higher. To sum up, brushless motors and differential motors have their own advantages and disadvantages, and the right type of motor should be selected according to the actual situation and application scenario. Brushless motors have superior performance and can achieve higher precision motion control, but are more expensive, while differential motors are less expensive but have poorer performance in terms of power output, noise, and temperature control. Therefore, users should choose the most suitable motor type according to their needs.

A stepper motor has a simple structure and can be speed-regulated over a wide range of frequencies, and its speed is not affected by the size of the load. As a specialist motor supplier, Leili will tell you several stepper motor control methods are described below. I. Tools / raw materials stepper motors, microcontroller, PLC, DCS II. Methods 1. Microcontroller control. A stepper motor is a digital control motor, its drive circuit works according to the control signal, it will pulse the signal into angular displacement, that is, to give a pulse signal, the stepper motor drive will rotate at an angle, so it is very suitable for microcontroller control. Through the microcontroller, control can be achieved by the pulse distribution to control the phase change sequence, from a given work mode positive sequence phase change power control of the motor (that is, to achieve the motor forward or reverse), by changing the interval between the two pulses to control the speed of the stepper motor and other adjustments. With ordinary 51 microcontrollers like AT89C2051 or STC12C1052 + THB7128 or THB6064, such chips to the combination can be. 2. Stepper motor controllers are easy to use with timing programs such as the TPC4-4TD, using the table settings without programming, you can set the pulse frequency, the number of pulses, and direction control data values, which can be achieved on the step motor drive speed control, position control, length control, timing control and a variety of basic operating functions. 3. The use of high-performance DSP, through the DSP using the bus voltage and motor running current, in the control algorithm to achieve closed-loop control of the stepper motor current, you can achieve accurate control of the step motor drive, but also through the control algorithm to improve the step motor drive in the low-speed vibration and noise. For example, the EZM series stepper drive system of Inax uses DSP control, which can get close to the servo operation performance in the low and medium speed section. 4. PLC-based control. The PIC programming output a certain number of square wave pulses, control the stepper motor angle, and thus control the servo mechanism feed, through the programming control pulse frequency to control the rotation speed of the motor, and then control the servo mechanism feed speed.

1. Stepper motors are used in low-speed applications – no more than 1000 revolutions per minute, (6666 PPS at 0.9 degrees), preferably between 1000-3000 PPS (0.9 degrees). It can be made to work in this range by means of a reduction device when the motor is working efficiently and with low noise. 2. It is best not to use the whole step state of the stepper motor, the whole step state when the vibration is large. 3. Only motors with a nominal 12V voltage use 12V. The other motor voltage value is not the drive voltage volt value, according to the driver can choose the drive voltage (Suggestion: SL57 using DC 24V-36V, SL86 using DC 50V, SL110 using higher than DC 80V). Of course, 12 volts can be used in addition to 12 V constant voltage drive other drive power, but the temperature rise should be considered. 4. Large rotational inertia of the load should choose a large seat number motor. 5. Motors at higher speeds or large inertia loads, generally not in the working speed start. Instead, use the gradual increase in frequency to speed up, a motor does not lose a step. Two can reduce noise at the same time, can improve the positioning accuracy of the stop. 6. High precision, should be through mechanical deceleration, and increase the motor speed. Or the use of a high fine fraction of the drive to solve can also be used as a 5-phase motor. However, its whole system is more expensive, with fewer manufacturers, and its elimination is a layman’s talk. 7. The motor should not work in the vibration zone, if necessary, can be solved by changing the voltage, the current, or adding some damping. 8. motor in 600PPS (0.9 degrees) below the work, should use a small current, large inductance, and low voltage to drive. 9. The principle of choosing the motor first and then the drive should be followed.