EC Centrifugal Fan
WARM REMINDER
You can filter products according to your needs. This screening system is for reference only, if you do not match the product you want, you can contact us.
Naming Convention
Product Introduction
- Impeller material: PP
- Control input: 0-10VDC/PWM
- Type of protection: IP54
- Insulation class: Class B
- Approvals: CCC CE
- Bearing: Maintenance-free ball bearings
- Protection: Motor current limitation/located-rotor protection/Soft start/Phase failure detection thermal protection
Product Introduction
- Rated at 230VAC, 50/60Hz, delivers 3200 r/min speed with 54W input power.
- Operates from -25℃ to +60℃, noise level is 68 dB(A) at 1 meter.
- Compact design, W1 wiring method, efficient EC motor with backward-curved impeller.
Product Introduction
- 230V AC, 50/60Hz, 4400 RPM speed, 110W max input power.
- Operates in -25°C to +60°C, 80 dB(A) noise at 1 meter.
- Φ175mm backward-curved impeller, efficient EC motor, W1 wiring method.
Product Introduction
- 230VAC, 50/60Hz, 2900RPM speed, 60W input power, quiet 70dB(A) noise at 1 meter.
- Operates reliably in ambient temperatures from -25°C to +60°C, suitable for varied climates.
- Compact Φ175mm size, backward-curved blades, W1 wiring method, supports EC motor control.
Product Introduction
- 230V, 3300 RPM speed, 90W power with low 73 dB(A) noise output.
- IP54 rated, PP impeller, Class B insulation, and ball bearings for maintenance-free operation.
- 0–10VDC/PWM input, soft start, thermal protection, and motor current limitation features included.
Product Introduction
- 230VAC, 4200 RPM speed, 200W power, quiet 82 dB(A) at 1m, wide temp range.
- PP impeller, IP54 protection, Class B insulation, soft start, thermal and phase failure protection.
- 0–10VDC/PWM input, current limitation, CCC & CE approved, ball bearings, rotor protection included.
